Fast-Patch™

Fast-Patch™

Fast-Patch™ can be applied from feather edge to 12” or more (with the addition of pea gravel.) Cures in less than an hour and can be driven on in less than 24 hours. At a cured rate of twice the strength of standard concrete (approx. 7,000 psi,) Fast-Patch™ is repair mortar for everything from a small chip to a large pothole.

Share this:Pin on PinterestShare on FacebookTweet about this on TwitterShare on LinkedInEmail this to someone

Fast-Patch™ is often used to patch areas of concrete that need thicker repair. After such repairs have been made, it is usually followed by use of G-100 Professional Series Grout Mix™, Micro-Topping or Stamp-Tek™ Stampable Overlay.

Share this:Pin on PinterestShare on FacebookTweet about this on TwitterShare on LinkedInEmail this to someone

1/3 of a cubic ft. per bag or 25 sq ft at ¼” thickness

Share this:Pin on PinterestShare on FacebookTweet about this on TwitterShare on LinkedInEmail this to someone

Be the first person to like this faq.

No. The polymer is in the mix and activated when you stir in water.

Share this:Pin on PinterestShare on FacebookTweet about this on TwitterShare on LinkedInEmail this to someone

Be the first person to like this faq.

You may coat over the material within 24 hours

Share this:Pin on PinterestShare on FacebookTweet about this on TwitterShare on LinkedInEmail this to someone

Be the first person to like this faq.

In approximately 30-60 minutes depending on temperature and other weather conditions.

Share this:Pin on PinterestShare on FacebookTweet about this on TwitterShare on LinkedInEmail this to someone

Be the first person to like this faq.

No. We recommend the use of a joint repair epoxy when repairing cracks. Please refer to the CCI catalog for the appropriate product.

Share this:Pin on PinterestShare on FacebookTweet about this on TwitterShare on LinkedInEmail this to someone

Be the first person to like this faq.

We are always innovating.

Want to keep up with the latest? Sign up for our updates!

  • This field is for validation purposes and should be left unchanged.