ProTek™ 95 is a solvent-based two-component 95% solids by weight polyaspartic aliphatic urethane clear coating.
ProTek™ 95 can be used as the base coat and the topcoat over decorative flake broadcasts or colored sand broadcasts
to provide an infinite array of color schemes or patterns. It has excellent chemical resistance, hardness, abrasion
resistance, UV stability and has an excellent clear gardner color. However, the outstanding feature of this product is
its quick tack free time for foot traffic.
ProTek™ 66 is a solvent-based two-component 66% solids by weight polyaspartic aliphatic urethane clear coating. ProTek™ 66 has excellent chemical resistance, hardness, abrasion resistance, UV stability and has an excellent clear gardner color. The outstanding feature of this product is its exceptionally quick tack free time of around 1-2 hours for foot traffic.
Concrete Coatings, Inc. EZ-Wax™ is an acrylic wax that provides a tough, anti-microbial sacrificial coat absorbing wear, making long-term floor maintenance easier. EZ-Wax™ is easy to apply and may be re-applied several times without stripping previous applications. This product may be applied on SuperSeal™ and GemKote™ sealers as well as Shield™ epoxy.
A non-yellowing acrylic solvent-based sealer that aids the curing process of freshly-placed concrete.
Traditional curing and sealing agents are usually meant as a sacrificial coat and are often required to be removed before applying a finish sealer. PS-18™ contains the same resin as SuperSeal™ and GemKote™, thereby allowing complete compatibility with these sealers. (Available with a VOC content less than 100 g/l upon request.) Use PS-18™ for a gloss finish as well as for its UV and stain protection.
Please check local regulations for VOC requirements.
Concrete Coatings, Inc. UV Shield™ is a 100% solids and 100% cross-linked product that can be applied to almost any surface: wood, tile, stone etc. It is used mainly as a clear coat over full or partial flake or quartz systems. UV Shield™ is also easily pigmented for use as a colored topcoat that will not show the effects of UV exposure that is common to epoxies. Shield 50™ may be used as a primer prior to UV Shield™ application.
Concrete Coatings, Inc. Shield™ 50 epoxy is a 100% Solids and 100% cross-linked product that can be applied to almost any surface: concrete, wood, tile, stone, etc. It can be used as a primer under a polyurethane application or UV Shield™ topcoat. This product can also be pigmented and used as a primer or topcoat. Unlike most other 100% solids epoxies, Shield 50™ contains no fillers or carriers and its cross-linking provides maximum durability, wearability, adhesion and increased UV resistance. UV Shield™ may be used as a topcoat for greater UV resistance.
- No VOCs - 100% Solids
- 100% Cross-linking
- Low Odor
- Excellent Strength Properties
- Excellent Impact Resistant
- DOT Non-Corrosive
Mix ratio is 2:1 A:B
Decorative Acrylic Broadcast Flakes
Concrete Coatings, Inc. decorative acrylic broadcast flakes are used for partial, random or full broadcast flake epoxy floors. These flakes are available in a full spectrum of colors. Flakes can be combined in any combination for unlimited color choices.
Packaging: 10 or 50 lb. boxes - Available in single or pre-blended colors.
Coverage: Varies – Call for details. May be applied as a random, full or double broadcast.
Acrylic broadcast flake 10 lb. box or 50 lb. box - Product codes listed under blends. Product codes ending in 10 =10 lb. and 50 = 50 lb.
Black & White Blend EP-FLK 510 EP-FLK550
Brown Blend EP-FLK 610 EP-FLK650
Gray Blend EP-FLK 210 EP-FLK250
Sahara Blend EP-FLK 410 EP-FLK450
Blue Blend EP-FLK 110 EP-FLK150
Beige Blend EP-FLK 310 EP-FLK350
Decorative Colored Quartz
Concrete Coatings, Inc. urethane-coated semi-angular quartz sand for installing full broadcast decorative epoxy flooring.
Packaging: 50 lb. boxes - Available in single or pre-blended colors.
Coverage: Varies – Call for details.
Urethane-coated colored quartz sand 50 lb. box. Product codes listed under blends. Required order minimum: 8 - 50 lb. bags for quartz blends or 1 - 50 lb. bag for solid colors.
Blends shown are full broadcast.
Cream Blend EP-QTZ350
Red Blend EP-QTZ150
Natural Blue Blend EP-QTZ550
Mocha Blend EP-QTZ450
Gray Blend EP-QTZ250
Brown Blend EP-QTZ650
Pigment Colors
Shield 50™ or UV Shield™ epoxy may be pigmented in these colors.
Concrete Gray (CG)
Medium Gray (MG)
Dark Gray (DG)
Tan (TN)
Sand Beige (SB)
