Overlay systems for commercial and residential use create a unique look.
This page is used to display the product literature only.
Micro-Toppings - Rough Grade
Concrete Coatings, Inc. Micro-Tek™ Micro-Toppings are commonly used on countertops or floors where an acid stain is desired, when the concrete itself is too abused to allow for a pristine surface. Rough Grade is available in natural, while Smooth Grade is available in white and gray. They are forgiving and easy to apply. Concrete Coatings, Inc. Micro-Tek™ Micro-Toppings require rough grade (RG) as a base coat and smooth grade (SG) as a top coat. These Micro-Toppings have just the right addition of polymer in the mix for their application—just add water. A separate polymer is not required.
Broom-Tek™ is a polymer modified cementitious coating specifically designed as an overlayment for any concrete surface, providing an economical way to resurface and beautify old, chipped, spalled, or scaled concrete.
- Polymer modified
- Freeze and thaw resistant
- Safe from deterioration from oils, grease, and salts
- Interior or exterior application
- Extremely durable
- Tenacious bond
Continuous Run Compressor Complete with Hose
Used specifically for spraying textured surfaces.
Concrete Coatings, Inc. provides durable tools that work well with our product line. We have found these tools to hold up to our materials and wear exceptionally well.
Stamp-Tek™ Liquid Release
Concrete Coatings, Inc. Stamp-Tek™ Liquid Release has a unique blend of ingredients to provide a colorless barrier that eliminates concrete build-up on mats and texture tools when stamping. Stamp-Tek™ Liquid Release evaporates, leaving no residue of any kind. Looks, feels and smells like the reliable bubble gum standby, but the difference will be obvious to the trained professional.
Concrete Coatings, Inc. DuraSet™ VAE is a 100% Vinyl Acetate Resin designed specifically as a primer for Stamp-Tek™ Stampable Overlay. VAE resins are a time tested technology and are best known for their adhesion and performance when thicknesses exceeds 1/4”. As a VAE, it is capable of being re-emulsified only one time, allowing subsequent applications to adhere well, yet eventually forming a tough, durable and long-lasting binder or film.
Stamp-Tek™ Stampable Overlay
Concrete Coatings, Inc. Stamp-Tek™ Stampable Overlay is a dry polymer mix that creates the look of newly-stamped concrete over existing concrete surfaces. These overlays come in natural gray and work with color hardeners, powdered or liquid releases and acid stains. Stamp-Tek™ Stampable Overlay polymers are already in the mix, so there’s never a question of mixing integrity- just add water. DuraSet™ VAE resin is required as a primer/bonder for this product.
Concrete Coatings, Inc. DuraSet™ 1000 is an all-acrylic resin designed specifically for binding of cementitious materials, including overlays, mortars, and grouts. DuraSet™ 1000 is comprised entirely of high quality resins which, when combined, are easy to apply. In addition to acting as a binder for cementitious overlays, it can be used with our C-Series Liquid Colorants when performing faux finishing techniques.
DuraSet™ 1000 is most commonly mixed with G-100 Pro-Series Grout Mix™ as part of the Spray-Tek™ Overlay System it is also commonly used as a primer for the Spray-Tek™ Overlay System. In addition to acting as a binder for cementitious overlays, DuraSet™ 1000 can be used with our C-Series Liquid Colorants when performing faux finishing techniques. When the temperature drops to 60° or below, DuraSet™ 1000 be combined with DuraSet™ 1001-FastSet™ to accelerate cure times.