Category: Overlays

Overlay systems for commercial and residential use create a unique look.

G-100 Pro-Series Grout Mix™

Combine with DuraSet™ 1000 or DuraSet™ 1001 FastSet™ polymer for spray or troweled down applications with our Spray-Tek™ Overlay System. Accepts our C-Series Liquid Colorants and has a special sand gradation to make it very easy to use for a multitude of applications. Recommended for applications 1/4” or less.

  • Freeze-Thaw Resistant
  • Outstanding Flexural properties (allows for concrete thermal expansion)
  • Excellent impact resistance
  • Resistant to to most chemicals when properly sealed

Micro-Toppings - Smooth Grade

Concrete Coatings, Inc. Micro-Tek™ Micro-Toppings are commonly used on countertops or floors where an acid stain is desired, when the concrete itself is too abused to allow for a pristine surface. Rough Grade is available in natural, while Smooth Grade is available in white and gray. They are forgiving and easy to apply. Concrete Coatings, Inc. Micro-Tek™ Micro-Toppings require rough grade (RG) as a base coat and smooth grade (SG) as a top coat. These Micro-Toppings have just the right addition of polymer in the mix for their application—just add water. A separate polymer is not required.

MUST BE USED WITH MICRO-TEK™ MICRO-TOPPINGS ROUGH GRADE.

Trowels

Used for applying the skim coat of the Spray-Tek™ Acrylic Overlay, rough grade (RG) Micro-Topping and smooth grade (SG) Micro-Topping without any grooves or ridge marks.

8" Margin Trowel
Description: 8" Margin Trowel
Used for clean up and detail work on overlays or mortars.

Magic Trowel Smoother
Description: Magic Trowel Smoother
Used for applying G-100 Professional Series Grout Mix™ and Micro-Topping while standing. May also be used for smoothing Stamp-Tek™ Stampable Overlay gauge marks.

Rubber Spray Shields

Description: Rubber Spray Shields (150 Lineal Feet)

Reusable mats used in conjunction with paper masking to prevent over-spray in unwanted areas.

Propane Torch with Hose

Description: Propane Torch with Hose

Used in conjunction with crack repair to heat and dry repair areas.

Professional Grade Drill

Description: 1/2" Heavy Duty Drill, Professional Grade (Bosch 6.5 Amp)

Used for mixing Concrete Coatings, Inc. G-100 Professional Series Grout Mix™, Micro-Topping and Stamp-Tek™ Stampable Overlay

Pressure Washer Turbo Tip

Description: Spraying Mantis Professional Grade Hopper Gun.

Used for application of the Spray-Tek™ Acrylic Overlay System.

Repair Kit
Description: Spraying Mantis Hopper Gun Repair Kit
Used for replacing worn parts on the Spraying Mantis Overlay Spray Gun. This helps avoid having to buy a brand new gun every time parts wear.

Overlay Spray Gun

Description: Spraying Mantis Professional Grade Hopper Gun.

Used for application of the Spray-Tek™ Acrylic Overlay System.

Repair Kit
Description: Spraying Mantis Hopper Gun Repair Kit
Used for replacing worn parts on the Spraying Mantis Overlay Spray Gun. This helps avoid having to buy a brand new gun every time parts wear.

Continuous Run Compressor

Description: Continuous Run Compressor Complete with Hose

Used specifically for spraying textured surfaces.

Mixing Paddle

Used with a heavy duty drill to mix Concrete Coatings, Inc. G-100 Professional Series Grout Mix™, Micro-Topping, Stamp-Tek™ Stampable Overlays and Fast-Patch™ Mortar Repair.